Makita 18V 6 Piece Kit with 3 x 5.0Ah Batteries Charger & Free 100 Accessory Set T4TKIT-7316

Makita 18V 6 Piece Kit with 3 x 5.0Ah Batteries Charger & Free 100 Accessory Set T4TKIT-7316

Kit Includes:

Makita DHP482Z 18V LXT Combi Drill
Makita DTD152Z 18V LXT Impact Driver
Makita DHR202Z 18V Rotary Hammer SDS Plus
Makita DGA452Z 18V LXT Angle Grinder
Makita DTM50Z 18V LXT Multi-Tool
Makita DML815 18V LXT Torch

Features:

Makita DHP482 Combi Drill:

Electric brake
Mechanical 2-speed control
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
Ergonomic soft grip handle
Compact overall length of 198mm
Single sleeve keyless chuck
Lightweight design
Battery protection circuit
All metal gears

Makita DTD152 Impact Driver:

Compact design with a short overall length of 138mm
One-touch bit installation
Fully Compatible with 18V 4.0Ah Battery with 36 minute charge time.
LED job light with pre-glow and afterglow functions
Enhanced dust and drip-proof performance
New compact charger
Compact and lightweight, 4-pole motor
Ergonomically designed handle
Lithium-ion battery, lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery.
Battery fuel gauge

Makita DHR202 Rotary Hammer:

22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Conveniently located push button for forward and reverse.
High comfort grips.
LED job light with afterglow.
One-touch sliding chuck for easy bit changes.
Triple operation mode: Rotary only, hammer only and rotary hammer.
Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions.

Makita DGA452 Angle Grinder:

Electric brake
Variable speed control trigger
Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current
Forward and reverse trigger
LED job light
Ergonomic soft grip

Makita DTM50Z Multi-Tool:

Thumb On/Off switch, positioned for ease of use when holding body of machine.
Hex wrench holder on body.
Variable speed control dial.
Dust extraction attachment.
Accessories can be installed at 30º increments, across 360º
Uses OIS interface.

Makita DML815 Torch:

12 pivoting positions with 0 to 170º swivel range
4 LED bulb for maximum illumination
Lightweight and compact for work in tight spaces
Accessory strap enables tool suspension for hands-free work
54 hours of continuous run-time

Comes With:

2 x DC18RC Charger
3 x 5.0Ah BL1850 Li-Ion Batteries
1 x 26" Tool Bag
1 x B-53811 100 Piece Drill & Screwdriver Bit Set

Makita B-53811 Contents:

1 x Magnetic bit holder
1 x 2 x holesaws (32 and 38mm)
1 x Holesaw arbor
1 x Countersink
3 x wrench bits (6, 8 and 10mm)
2 x flat wood bits (12 and 16mm)
6 x HSS drill bits (2, 2 x 3, 4, 5 and 6mm)
7 x 3-point wood drill bits (2 x 3, 4, 2 x 5, 6 and 8mm)
4 x masonry drill bits (2 x 6, 7 and 8mm)
12 x 50mm screwdriver bits (5 x Philips (PH1, 3 x PH2 and PH3)
5 x Pozi (PZ1, 3 x PZ2 and PZ3) and 2 x Torx (T20 and T30))
1 x tic-tac tub containing 25 x 25mm PZ2 bits and 36 x 25mm screwdriver bits (6 x Torx (T10, T15, T20, T25, T30 and T40)
7 x Philips (2 x PH1, 3 x PH2 and 2 x PH3)
4 x slotted (4, 4.5, 5 and 7mm)
4 x Hex (4, 5, 6 and 7mm) and 15 x Pozi (2 x PZ1, 11 x PZ2 and 2 x PZ3)

Product Specifications:

Part No.: T4TKIT-1297
Barcode: 8906763717082

Makita DHP482 Combi Drill:

Barcode: 0088381699051
Battery Type: Li-ion
Voltage: 18V
Max. in Masonry: 13mm
Max. in Steel: 13mm
Max. in Wood: 38mm
Max. Fastening Torque: S/H 36/62 Nm
Chuck Capacity: 1.5 - 13mm
Torque Settings: 21 + Drill
No Load Speed Hi: 0 - 1,900rpm
Low: 0 - 600rpm
Blows per Minute Hi: 0 - 28,500bpm
Low: 0 - 9,000bpm

Makita DTD152 Impact Driver:

Battery Type - Lithium-ion
Voltage - 18v
Electric Brake
Variable Speed Control
Impacts - 0-3200 ipm
Drive shank Hex - 6.35mm (1/4")Reverse switch
Standard Bolt - M5-M14
Joblight
No Load Speed - 0-2300rpm
Max Torque - 160Nm
Vibration: Fastening Bolt - 15.5 m/sec²
Vibration K factor - 2 m/sec²

Makita DHR202 Rotary Hammer:

Battery Type - Lithium-ion
Charging Time - 22min
Voltage - 18v
Max in concrete - 20mm
Max. in steel - 13mm
Max. in wood - 26mm
Impact energy - 2.0J
Blows per minute - 0-4000bpm
Noise sound pressure - 87dB(A)
Noise sound power - 98dB(A)
Noise K factor - 3dB(A)
No Load Speed - 0-1100rpm
Vibration: Drilling - 3 m/sec²
Vibration K factor - 1.5 m/sec²
Vibration: Hammer Drilling - 14.5 m/sec²
Vibration: Chiselling - 11 m/sec²

Makita DGA452 Angle Grinder:

Grinding Wheel: 4-1/2" / 115mm
Cut-Off Wheel: 4-1/2"
Wire Cup Brush: 3-1/2" / 115mm
Sanding Disc: 4-1/2" / 115mm
No Load RPM: 10,000
Watt Hours: 54.0
Spindle Thread: 5/8" - 11 UNC
Overall Length: 12-1/2"

Makita DTM50Z Multi-Tool:

Battery Type - Lithium-ion
Charging Time - 22 min
Voltage - 18v
Oscillation Angle - 3.2 º
Oscillations per Minute - 6000 - 20000
Vibration K factor - 1.5 m/sec²
Vibration: Cutting Metal - 5 m/sec²
Vibration: Cutting Wood - 9.5 m/sec²
Vibration: Chiselling - 7.5 m/sec²
Vibration: Sanding - 2.5 m/sec²

Makita DML815 Torch:

Part Number: DML815
Barcode: 0088381886970
Continuous Runtime: 6.0Ah - 54 hours
Battery: 18V LXT Lithium-ion
Lumens: 160
Luminous Flux: 160lm
Illuminance at 1m: 3,000lx
Overall Length: 272mm